Cutaway campervan showing a plywood kitchen, bed and storage fitted inside, from the DoIt Camper furniture plans

DIY Campervan Furniture · Send to CNC. Assemble at home.

Campervan furniture plans.
Send to CNC. Assemble at home.

Download the 3D model, DXF cut files and assembly guide. Any CNC shop cuts it, or cut it yourself. No special tools or experience needed.

See the kitchen plan How it works

  • 3D modelCheck every part before you cut
  • DXF cut filesMillimetres, ready for any CNC shop
  • Step-by-step guideNo special tools or experience
  • Instant downloadDigital only, nothing shipped

Process

Download. Cut. Build.

  1. Download

    Buy a plan and download it straight away: the 3D model, DXF cut files and the step-by-step assembly guide.

  2. Cut

    Send the DXF files to any CNC shop, or cut them yourself. Every panel, hole and joint is ready to cut.

  3. Build

    Follow the guide step by step and assemble at home. No special tools, no experience needed.

Five steps: download the 3D model and DXF files, explore in 3D, read the technical plans, CNC cut the parts, assemble at home

Finished DoIt Camper Kitchen plywood cabinet with hob cut-out, drawers and oak-look worktop, 3D render

Available now

DoIt Camper Kitchen

A complete campervan kitchen module for CNC cutting: 1000 × 610 × 895 mm, built around a Thetford Triplex SOH70 oven, grill and hob, with a cylinder cabinet, three soft-close drawers and a plinth with LED strip. Send the files to a CNC shop, then assemble it at home.

  • Drawn around the Thetford Triplex SOH70 cutout
  • 1000 × 610 × 895 mm, 15 mm plywood
  • 3D model, DXF cut files and step-by-step guide

€49 digital download

View the plan

Plans

Browse by category

Campervan kitchen module, 3D render
Available now

Kitchen Modules

Cutaway campervan showing the rear bed and sleeping area
Coming soon

Beds & Sleeping

Cutaway campervan showing overhead cabinets and storage
Coming soon

Storage & Wardrobes

Our story

A van builder’s furniture, without the freight

DoItCamper comes from Vanda Atölye Karavan, a small workshop in Turkey that has been building custom campervans since 2017. In that time we built 14 one-of-a-kind vans, each one drawn, cut and fitted by hand. Customers abroad kept asking the same question: could they get our furniture without shipping a whole van across a border? Customs, transport and long waits made that hard.

So we turned our builds into CNC-ready flat-pack plans. You download the files, send them to any local CNC shop, and assemble the parts at home with a screwdriver.

Read our story

Plan by van

Measure first, then choose

Furniture fits a layout, not a badge. Each van guide has a checklist of what to measure before you order.

Guides

Learn before you cut

CNC router cutting plywood furniture parts from a nested DXF layout
6 min read

How to Get Campervan Furniture CNC Cut: A Beginner's Guide

You do not need a workshop to build campervan furniture. You need a good set of files and a local CNC shop. This guide walks through the whole process.

Printed technical drawings of campervan furniture parts and a nested cut layout
5 min read

DXF vs SVG vs DWG: Which File Does Your CNC Shop Need?

Three file types dominate CNC work. Knowing which one your shop wants saves a day of emails.

Plywood panels leaning next to a flat-pack cabinet being assembled
6 min read

Best Plywood for Campervan Furniture: Thickness, Weight and Finish

Furniture is heavy, and every kilogram counts in a van. The right plywood makes cabinets strong, light and easy to finish.

All guides

Hear about the next plan

The bed and storage plans are in development. Leave your email on the contact page and we will write once, when a plan is released.

Get notified